Mobilogix Protocol ([T# CSV)
Mobilogix on TCP 5216: [yyyy-mm-dd hh:mm:ss,T# CSV closed by ], T6 silent, others [time,S...].
On Traxelio
What Mobilogix trackers do once they are on Traxelio
Hardware that speaks this protocol
Devices that speak Mobilogix
Point this protocol at Traxelio
Point Mobilogix at Traxelio
-
1
Capture a Mobilogix fingerprint
Confirm a bracket CSV that opens [ plus yyyy-mm-dd, carries a T# type, and closes ].
-
2
Point Mobilogix at 5216
Configure only Mobilogix to TCP 5216. Mobilogix on 5216 is not Moovbox on 5212 or Jido on 5237.
-
3
Watch the T6 exception
T6 has no reply. T1 is answered [time,S1,1]. Other types are answered [time,Sn].
-
4
Prove one Mobilogix fix
Send one line with a lat/lon tail and a valid digit greater than 0 on 5216 and verify a map point.
Still offline after GPS lock
Mobilogix still not landing
- Mobilogix aimed at the wrong port
Mobilogix on 5216 is not Moovbox on 5212 or Jido on 5237.
- Session up, empty map
Need the optional lat/lon tail and a valid digit greater than 0. Serial plus battery alone will not plot a new point.
- No reply on T6, assumed dead
Type T6 is silent by design. Check the map. Other types answer [time,S...].
FAQ
Mobilogix leftover questions
Does Mobilogix send Concox 0x7878 frames?
No. Mobilogix is a bracket CSV closed by ]. Concox families use 0x7878 binary login.
Which Mobilogix type skips a reply?
T6 is silent. T1 is answered [time,S1,1]. Other types are answered [time,Sn].
Why does a Mobilogix line bind without a map fix?
The optional lat/lon tail was missing, or the valid digit was 0. A serial plus battery alone will not plot a new point.
What do Mobilogix T8 through T15 mean?
T8 low battery, T9 vibration, T10 power cut, T11 low power, T12 geofence exit, T13 overspeed, T15 tow.
Can a Mobilogix unit run SMS setup or a controlled-action flow?
This dialect is positions only. BAT-M1, BAT-X, MT2000, MT2000S, and MT4x00 are listed.