Server address
Send positions to this server
Add by IMEI · server and port 5053
Check First
Review
The IMEI from the unit's label, a SIM with data, and the values gps.traxelio.com and 5053 stored in the unit. Add the IMEI in your Traxelio account, then wait for a position outdoors.
We found no maker sheet that says so, and a public device list gives just its name and protocol. Check your seller's sheet before relying on any camera feature.
Port 5053. A public device list shows the NR024 on the Noran protocol, and Traxelio receives that protocol there.
We found none, so no commands are offered here. Your seller's sheet or Traxelio support is the place to get the exact steps for your unit.
Overview
To add a Noran NR024 to Traxelio, you need the IMEI printed on the unit, the server address gps.traxelio.com and the port 5053. A public device list places the NR024 on the Noran protocol at that port, and Traxelio receives that protocol. Register the IMEI in your account, store the server and port in the unit following your seller's sheet, then take the vehicle outdoors and wait for a position to appear. We found no maker datasheet for the NR024, so this page gives no size, supply range, feature list or SMS commands.
About Noran
Noran GPS trackers: a public device list puts every Noran model it names on one protocol, which Traxelio receives on port 5053.
Speaks the Noran Protocol (0x0008 / 0x0032 *KW) protocol. Read the protocol reference →
Protocol known
Traxelio recognizes this protocol, then checks the exact IMEI and model details before activation.
Technical Specs
| Brand | Noran |
| Protocol | Noran Protocol (0x0008 / 0x0032 *KW) |
| Status | Protocol known |
| Setup Signals | IMEI check first |
| Setup | Check hardware → |
Setup
Setup guidance
Enter the tracker IMEI so Traxelio can review this exact hardware before setup.
Server changes on an NR024 follow your seller's sheet. Target values: gps.traxelio.com and port 5053. Traxelio support can help if there is no sheet.
Compare the IMEI in your account with the label on the unit, then check that the stored server reads gps.traxelio.com and the port reads 5053.
A unit that was used elsewhere may still hold an earlier address. Re-enter both the server and the port using your seller's sheet.
Add the IMEI in your account first, then power the unit again outdoors so it sends a fresh position.
FAQ
Common questions about using the NR024 with Traxelio
Enter the tracker IMEI so Traxelio can review this exact hardware before activation.
Availability
Connect a tracker you already own, or add a vehicle.