Server address
Send positions to this server
From another server · address and port 5053
Check First
Review
Add the IMEI in Traxelio, then store gps.traxelio.com and port 5053 in the unit using your seller's sheet. Keep the previous account active until a position appears on Traxelio.
It helps to. History from the previous service may not carry over, so export any you need before the switch.
A public device list gives port 5053 for the NR032 and for the other Noran models it names, so the value matches across them.
We found none, so no commands appear here. Your seller's sheet or Traxelio support can supply the exact steps.
Overview
If your Noran NR032 reported to a different server before, the move to Traxelio comes down to two stored values: the address gps.traxelio.com and the port 5053. A public device list shows the NR032 on the Noran protocol at that port, and Traxelio receives the protocol there. Add the IMEI to your account, change the stored server using your seller's sheet, and keep the old account until a position shows up on Traxelio. No maker datasheet or public command list was found for the NR032, so this page offers no dimensions or SMS commands.
About Noran
Noran GPS trackers: a public device list puts every Noran model it names on one protocol, which Traxelio receives on port 5053.
Speaks the Noran Protocol (0x0008 / 0x0032 *KW) protocol. Read the protocol reference →
Protocol known
Traxelio recognizes this protocol, then checks the exact IMEI and model details before activation.
Technical Specs
| Brand | Noran |
| Protocol | Noran Protocol (0x0008 / 0x0032 *KW) |
| Status | Protocol known |
| Setup Signals | IMEI check first |
| Setup | Check hardware → |
Setup
Setup guidance
Enter the tracker IMEI so Traxelio can review this exact hardware before setup.
Changing the server on an NR032 follows your seller's sheet. Target values: gps.traxelio.com and port 5053. Traxelio support can help if the sheet is missing.
Both values must change together. Confirm the unit stores gps.traxelio.com and 5053, not the previous server's port.
Once the new values are stored, expect positions to go to Traxelio and the previous account to stop receiving them. If both still update, recheck the stored values.
Read the IMEI from the unit's own label, not from the previous platform's records, and correct the account entry.
FAQ
Common questions about using the NR032 with Traxelio
Enter the tracker IMEI so Traxelio can review this exact hardware before activation.
Availability
Connect a tracker you already own, or add a vehicle.