AIS Protocol (!AIVDM types 1/2/3/18)

AIS on TCP 5130: !AIVDM sentences, MMSI bind, types 1/2/3/18 plot speed course heading and lat/lon.

Positions go to this server

gps.traxelio.com:5130 TCP
I already have a tracker

Connect your tracker

Enter your tracker IMEI to see whether Traxelio recognizes the model before you start setup.

Point this protocol at Traxelio

Point Ais at Traxelio

  1. 1

    Capture an AIS fingerprint

    Confirm a line that opens with !AIVDM,. Reject 0xFD type 33 as Mavlink 2 and HTTP XML as SPOT.

  2. 2

    Point AIS at 5130

    Configure only AIS to TCP 5130. AIS on 5130 is not Mavlink 2 on 5224 or SPOT on 5156.

  3. 3

    Do not wait for an ACK

    AIS has no reply byte. A parsed type 1, 2, 3, or 18 payload is enough.

  4. 4

    Prove one AIS fix

    Send one !AIVDM type 1, 2, 3, or 18 payload whose valid bit is set and verify a map point.

Still offline after GPS lock

Ais still not landing

AIS aimed at the wrong port

AIS on 5130 is not Mavlink 2 on 5224 or SPOT on 5156.

Session up, empty map

Only types 1, 2, 3, and 18 plot, and the valid bit must be set. Other types will not plot.

No ACK, assumed dead

This dialect has no reply byte. Check the map, not the socket for an ACK.

FAQ

Ais leftover questions

Does AIS send Concox 0x7878 frames?

No. AIS sends !AIVDM comma sentences. Concox families use 0x7878 binary login.

Which AIS message types plot?

Types 1, 2, 3, and 18. Other types are ignored and will not plot.

Does AIS send an ACK?

No. There is no reply byte. A parsed type 1, 2, 3, or 18 payload is enough to plot.

What binds an AIS unit?

The 30-bit MMSI inside the payload. There is no 15-digit IMEI on this row.

Can an AIS receiver run SMS setup or a controlled-action flow?

This dialect is positions only. The AIVDM/AIVDO AIS unit is listed. There is no SMS family on this row.

T
Trax
Online
Say hello to Trax!