Ardi 01 Protocol (IMEI,yyyymmddhhmmss,lon,lat)
Ardi 01 on TCP 5075: IMEI, yyyymmddhhmmss, longitude then latitude, speed in km/h, sats, event, battery, temperature.
On Traxelio
What ARDI01 trackers do once they are on Traxelio
Point this protocol at Traxelio
Point ARDI01 at Traxelio
-
1
Capture an Ardi 01 fingerprint
Confirm IMEI, compact yyyymmddhhmmss, then longitude before latitude. Reject FOLLOWIT, as Appello.
-
2
Point Ardi 01 at 5075
Configure only Ardi 01 to TCP 5075. Ardi 01 on 5075 is not Avema on 5171 or Intellitrac on 5037.
-
3
Do not wait for an ACK
Ardi 01 has no reply byte. A parsed line with 3 or more satellites is enough.
-
4
Prove one Ardi 01 fix
Send one CSV line whose satellite count is 3 or more on 5075 and verify a map point.
Still offline after GPS lock
ARDI01 still not landing
- Ardi 01 aimed at the wrong port
Ardi 01 on 5075 is not Avema on 5171 or Intellitrac on 5037.
- Point landed in the ocean
Ardi 01 sends longitude before latitude. A swapped pair will not match the road.
- Session up, empty map
Satellite count must be 3 or more. Fewer satellites bind the IMEI and will not plot.
FAQ
ARDI01 leftover questions
Does Ardi 01 send FOLLOWIT, lines?
No. Ardi 01 is a bare IMEI CSV. FOLLOWIT, belongs to Appello.
Which number is latitude on an Ardi 01 line?
Longitude is third. Latitude is fourth. The pair is signed decimal degrees.
Why does an Ardi 01 line bind without a map fix?
Satellite count below 3 will not plot. The IMEI field alone is not a fix.
Does Ardi 01 send an ACK?
No. There is no reply byte. A parsed line with 3 or more satellites is the whole handshake.
Can an Ardi 01 unit run SMS setup or a controlled-action flow?
This dialect is positions only. One catalogue device is listed (Ardi 01). There is no SMS family on this row.