5 devices 1 brand

Carcell Protocol (CR ASCII with CEL, branch)

Carcell CR ASCII on Traccar TCP 5114: $/% memory flag, IMEI, NMEA or CEL, branch; engine stop/resume capable in Traccar.

Connect your tracker

Enter the tracker IMEI first, then verify your email and continue setup.

Browse 5 supported devices

Quick answers

Stock Traccar port?

TCP 5114.

Frame delimiter?

Carriage return (\r).

CEL branch?

Literal CEL, switches to decimal lat/lon fields.

Carcell on Traccar TCP 5114 frames on CR. Pattern starts with memory flag $ or %, IMEI, then either NMEA-style N/S ddmm.mmmm pairs or a CEL, branch with decimal lat/lon. Traccar’s CarcellProtocol also registers engine stop/resume data commands — Traxelio still catalogues positions_only and does not claim operator command delivery.

CR + CEL, on 5114

AutoGrade uses ) on 5120; Carscop uses ^ on 5040. Carcell’s CR terminator and optional CEL, token are the fingerprint.

Catalogue stance

Stock Traccar reference for decoder/port. Traxelio does not invent full command support beyond positions_only.

Setup walkthrough

  1. 1

    Set TCP 5114

    Host + 5114; reboot.

  2. 2

    Capture $ or % prefix

    Memory flag distinguishes live vs buffered sentences before IMEI.

  3. 3

    Note NMEA vs CEL,

    CEL, means decimal degrees; otherwise expect N/S E/W packed minutes.

  4. 4

    Treat engine commands as Traccar-only

    Open-source encoder support ≠ Traxelio provisioning claim.

Setup

Public setup commands

Use these rows only after confirming the tracker password and SIM settings. Command families can differ between brands even when they use the same protocol.

Reference

Configuration reference

Parameter Value
Port 5114

Telemetry fields

GPS Location Speed Altitude Heading / Direction Street Address GPS Accuracy Ignition Status Odometer / Mileage Battery Level

All Models

All Carcell Devices (5)

Start with the strongest matches, then use pagination or brand pages for the full compatibility list.

Carcell CR1000

Carcell

Carcell CR2000

Carcell

Carcell CR250

Carcell

Carcell CR3000

Carcell

Carcell CR4000

Carcell

Common troubleshooting

LF-only frames

Delimiter is CR; LF-only lines never close the frame decoder.

CEL, misread as NMEA

When CEL, appears, switch to decimal branch parsing.

Assuming Traxelio will stop engines

Catalogue tier remains positions_only despite Traccar encoder hooks.

Explore More

Other Protocols

Carscop

9 devices

Autograde

1 device

C2STEK

1 device
View All Trackers

FAQ

Frequently Asked Questions

Does Traxelio expose engine stop?

No claim here. Traccar lists the commands; Traxelio tier is positions_only.

Sibling delimiters?

Carscop ^ on 5040; AutoGrade ) on 5120 — different ASCII families.

Connect Carcell tracker
T
Trax
Online
Say hello to Trax!