Eelink old/new binary on Traccar TCP/UDP 5064 with BLE MAC tags, OBD decode path, and length-field framing.
On Traxelio
Hardware that speaks this protocol
Who ships hardware on this wire
Point this protocol at Traxelio
Note old vs new firmware before comparing hex samples.
Host + 5064; UDP only if the sheet requires it.
Not line ASCII; keep a hex capture of the first packages.
If fitted, confirm those attributes after a fix.
Guided setup available
Set reporting interval
TIMER,60#Check parameters
PARAM#APN commands depend on the carrier SIM in your tracker, so they are not shown here.
Guided setup available
Set reporting interval
COLLECT,60#APN commands depend on the carrier SIM in your tracker, so they are not shown here.
Still offline after GPS lock
Retarget to 5064; Aplicom cold-unit frames will not satisfy Eelink packages.
Old/new decode branches diverge; re-capture package headers.
Tag scanning may be off; decoder only emits present tags.
FAQ
No. Eelink is its own 5064 binary family with optional OBD package types.