Haicom on TCP 5063: $GPRS then IMEI, version, yymmdd, hhmmss, flags digit, packed lat/lon, speed, course, #V battery.
On Traxelio
Hardware that speaks this protocol
Point this protocol at Traxelio
Confirm ASCII that opens $GPRS with a version token after the IMEI, not id_R or $GM.
Configure only Haicom to TCP 5063. Haicom on 5063 is not Homtecs on 5104 or GPS Marker on 5057.
Haicom has no reply byte. A parsed $GPRS line is enough.
Send one $GPRS line whose flags bit 0 is set on 5063 and verify a map point.
Still offline after GPS lock
Haicom on 5063 is not Homtecs id_R on 5104 or GPS Marker $GM on 5057.
Flags bit 0 must be set. A missing version token between IMEI and date will not parse.
This dialect has no reply byte. Check the map, not the socket for an ACK.
FAQ
No. Haicom is $GPRS ASCII CSV. Concox families use 0x7878 binary login.
Bit 0 of the flags digit. When that bit is off, the row will not plot.
No. There is no reply byte. A parsed $GPRS line is the whole handshake.
The digits immediately after $GPRS, before the version token.
This dialect is positions only. HI-602, HI-603, HI-604, and HI-605X are the listed devices.