Jointech JT600 P05 SMS
Guided setup available
Enable standard GPRS mode
(P07,1,1)
APN commands depend on the carrier SIM in your tracker, so they are not shown here.
JT600 on TCP 5014: $ BCD binary fixes, or (id,W01/U01/P45) text; A or T plots; not JT/T 808.
On Traxelio
Hardware that speaks this protocol
Point this protocol at Traxelio
Confirm a $ binary record with a 5-byte hex id, or a parenthesis line with W01, U01, or P45. Reject JT/T 808 binary as the 5015 neighbor.
Configure only JT600 to TCP 5014. JT600 on 5014 is not JT/T 808 on 5015 or JT1078 on 5263.
W01 has no reply. U01-U03 get (S39). U06 gets (S20). P45 and some long binary records get (P69,0,n) or (P35).
Send one W01 A, U-family T, or valid $ binary fix on 5014 and verify a map point.
Still offline after GPS lock
JT600 on 5014 is not JT/T 808 GPS on 5015 or JT1078 video on 5263.
W01 needs A. U-family needs T. Binary needs the valid bit. V or F will not plot.
W01 has no reply byte. Check the map. U01 and P45 are the verbs that answer.
FAQ
No. JT600 opens with $ binary or a parenthesis W01 / U01 / P45 row. Concox families use 0x7878 binary login.
A plots. V will not plot. U-family rows use T to plot and F to bind without a point.
Yes, when the flags byte marks valid and the BCD latitude / longitude pair parses. Course is a byte times 2.
An event source and a driver RFID when the ten digits are not 0000000000. Traxelio answers (P69,0,n).
This dialect is positions only. JT600, JT700, GP4000, and GP6000 class units are listed. (P05,1,...) and (P07,1,1) exist on this row.