Meitrack
Guided setup available
Set reporting interval
{password},A12,6APN commands depend on the carrier SIM in your tracker, so they are not shown here.
18 devices
1 brand
Meitrack Protocol ($$ flag, * sum)
Meitrack on TCP 5020: $$ flag then length, 15-digit IMEI, AAC/CCC/CCE or CSV ending * with A or V.
On Traxelio
What Meitrack trackers do once they are on Traxelio
Geo-Zones
Get alerted when vehicles cross boundaries
Driving Behaviors
PremiumDriver scoring software to reduce accidents and insurance costs
Predictive Maintenance
PremiumAutomated maintenance scheduling that prevents breakdowns
Trip History
Every trip recorded, every dispute settled
Controlled immobilizer action for compatible installations
Controlled immobilizer support for compatible installations
Fuel Level Monitoring
PremiumSee fuel level, volume, and consumption for every vehicle
Hardware that speaks this protocol
Devices that speak Meitrack
Point this protocol at Traxelio
Point Meitrack at Traxelio
-
1
Capture a Meitrack fingerprint
Confirm $$ then a flag char, a length, and a 15-digit IMEI. Reject $MGV as Megastek and MT; as Mictrack.
-
2
Point Meitrack at 5020
Configure only Meitrack to 5020 as TCP or UDP. Meitrack on 5020 is not Megastek on 5024 or Mictrack on 5191.
-
3
Treat AAC as a heartbeat
AAC is answered @@z27,{imei},AAC,1* plus the sum. That reply is not a map point.
-
4
Prove one Meitrack fix
Send one $$ CSV whose status is A on 5020 and verify a map point.
gps.traxelio.com:5020
TCP
Replace {password} with the tracker PIN or password.
What Traxelio surfaces from these packets
Meitrack fields Traxelio reads
- GPS Location
- Speed
- Altitude
- Heading / Direction
- Street Address
- GPS Accuracy
- Ignition Status
- Odometer / Mileage
- Engine Hours
- Battery Level
- Fuel Level
- Network / Cell Info
Still offline after GPS lock
Meitrack still not landing
- Meitrack aimed at the wrong port
Meitrack on 5020 is not Megastek $MGV on 5024 or Mictrack MT; on 5191.
- AAC heartbeat, empty map
AAC only binds the IMEI. A map point needs CSV status A, or CCC with valid byte 1.
- CSV up, no ACK, assumed dead
Regular $$ CSV has no reply. Check the map. Only AAC and CCC are answered.
FAQ
Meitrack leftover questions
Does Meitrack send Concox 0x7878 frames?
No. Meitrack opens $$ then a flag char, a length, and a 15-digit IMEI, and closes with a * sum. Concox families use 0x7878 binary login.
Which letter plots a Meitrack CSV fix?
A plots. V is void and will not plot. CCC binary plots when the valid byte is 1.
What does a Meitrack AAC exchange do?
AAC is a heartbeat. Traxelio answers @@z27,{imei},AAC,1* plus the sum. AAC alone will not plot.
Is Meitrack the same dialect as Mictrack?
No. Meitrack is $$ CSV on 5020. Mictrack is MT; plus-fields or unit$ NMEA-like on 5191.
Can a Meitrack unit run SMS setup or a controlled-action flow?
This dialect is positions only. There is no SMS family on this row.