14 devices 1 brand

Noran Protocol (0x0008 / 0x0032 *KW)

Noran on UDP 5053: little-endian length then type 0x0008 or 0x0032, shake 0x0000 replies 0x8000 *KW.

Positions go to this server

gps.traxelio.com:5053 TCP
I already have a tracker

Connect your tracker

Enter your tracker IMEI to see whether Traxelio recognizes the model before you start setup.

Hardware that speaks this protocol

Devices that speak Noran

Point this protocol at Traxelio

Point Noran at Traxelio

  1. 1

    Capture a Noran fingerprint

    Confirm a little-endian length then type 0x0000, 0x0008, or 0x0032. Reject 0x5858 as Niot.

  2. 2

    Point Noran at 5053

    Configure only Noran to UDP 5053. Noran on 5053 is not Niot on 5210 or M2M on 5054.

  3. 3

    Expect the *KW 0x8000 shake reply

    Type 0x0000 is answered \r\n*KW with type 0x8000. That exchange is not a map point.

  4. 4

    Prove one Noran fix

    Send one 0x0008 or 0x0032 body with validity bit 0 set on 5053 and verify a map point.

gps.traxelio.com:5053 TCP

Replace {password} with the tracker PIN or password.

Noran/UniGuard SMS (A pin,012 APN / 010 server)

Guided setup available

Enable GPRS

A{password},011,1

APN commands depend on the carrier SIM in your tracker, so they are not shown here.

Still offline after GPS lock

Noran still not landing

Noran aimed at the wrong port

Noran on 5053 is not Niot 0x5858 on 5210 or M2M on 5054.

Session up, empty map

Type 0x0000 only shakes. A map point needs type 0x0008 or 0x0032 with validity bit 0 set.

*KW reply, assumed plotted

The 0x8000 *KW shake reply is not a map point. Check the map for a 0x0008 or 0x0032 body.

FAQ

Noran leftover questions

Does Noran send Concox 0x7878 frames?

No. Noran sends a little-endian length then type 0x0008 or 0x0032 after a 0x0000 shake. Concox families use 0x7878 binary login.

Which Noran types plot a fix?

0x0008 and 0x0032 plot when bit 0 of the validity byte is set. 0x0000 is only the shake. 0x0200 image size will not plot.

What reply does a Noran shake get?

Bytes that open \r\n*KW then type 0x8000. That exchange is not a map point.

Where is the Noran unit id?

Eleven ASCII bytes on the old 0x0008 body, twelve on the new body, after lat/lon.

Can a Noran unit run SMS setup or a controlled-action flow?

This dialect is positions only. There is no SMS family on this row.

T
Trax
Online
Say hello to Trax!