8 devices 4 brands

Omnicomm Protocol (0xC0 stuffed / 0x80 / 0x86)

Omnicomm on TCP 5203: stuffed 0xC0, type 0x80 bind, type 0x86 protobuf archive; NAV lat/lon / 1e7; reply 0xC0.

Positions go to this server

gps.traxelio.com:5203 TCP
I already have a tracker

Connect your tracker

Enter your tracker IMEI to see whether Traxelio recognizes the model before you start setup.

Who ships hardware on this wire

Brands using Omnicomm

Point this protocol at Traxelio

Point Omnicomm at Traxelio

  1. 1

    Capture an Omnicomm fingerprint

    Confirm a stuffed 0xC0 record with type 0x80 (32-bit unit key) or type 0x86 protobuf archive.

  2. 2

    Point Omnicomm at 5203

    Configure only Omnicomm to TCP 5203. Omnicomm on 5203 is not OKO on 5152 or Ndtp V6 on 5243.

  3. 3

    Read 0x85 as bind, not as a plot

    After type 0x80, Traxelio answers 0xC0 type 0x85 with index 0. That reply is not a map point.

  4. 4

    Prove one Omnicomm fix

    Send one 0x86 archive with a NAV block (LAT and LON / 1e7) on 5203 and verify a map point.

gps.traxelio.com:5203 TCP

Still offline after GPS lock

Omnicomm still not landing

Omnicomm aimed at the wrong destination

Omnicomm on 5203 is not OKO on 5152 or Ndtp V6 on 5243.

Session up, empty map

Type 0x80 binds the unit key and will not plot. A map point needs type 0x86 with a NAV block.

0x85 seen, assumed plotted

Type 0x85 is the archive ask after bind. Check the map for a NAV lat/lon pair, not the 0x85 reply.

FAQ

Omnicomm leftover questions

Does Omnicomm send Concox 0x7878 frames?

No. Omnicomm opens stuffed 0xC0, then type 0x80 bind or type 0x86 protobuf archive.

What reply prefix does Omnicomm use?

0xC0 plus type, little-endian length 4, the index, and CRC16 CCITT FALSE. Type 0x85 asks for archive. Type 0x87 advances the archive index.

Which Omnicomm type carries map points?

Type 0x86 archive. A NAV block with GPSTime, LAT, and LON is required. A General-only record will not plot.

How is Omnicomm fuel carried?

LLSDt fields TLLS1 temperature, CLLS1 level, and FLLS1 state on the same archive record as NAV.

Can an Omnicomm unit run SMS setup or a controlled-action flow?

This dialect is positions only. There is no SMS family on this row. Host and destination are set in the Omnicomm Configurator, not by SMS.

T
Trax
Online
Say hello to Trax!