17 devices 8 brands

Taip Protocol (TCP 5031)

Taip on Traccar TCP 5031: `TaipProtocolDecoder` @ 5031: starts `RUV`/`#`/`#IP` · hex 0x01, 0x02 · pattern `private static final Pattern PATTERN = new PatternBuilder() .groupBegin() .expression("R[EP]V") // type .groupBegin() .n`.

Connect your tracker

Enter the tracker IMEI first, then verify your email and continue setup.

Quick answers

What port does taip use?

TCP 5031.

What identifies taip?

TaipProtocolDecoder @ 5031: starts RUV/#/#IP · hex 0x01, 0x02 · pattern `private static final Pattern PATTERN = new PatternBuilder()

What is taip not?

Not t800x@5094 / tek@5173 — taip is only on 5031 with: starts RUV/#/#IP · hex 0x01, 0x02 · pattern `private static final Pattern PAT

taip is served on Traccar TCP 5031. TaipProtocolDecoder @ 5031: starts RUV/#/#IP · hex 0x01, 0x02 · pattern private static final Pattern PATTERN = new PatternBuilder() .groupBegin() .expression("R[EP]V") // type .groupBegin() .n

PatternBuilder evidence: private static final Pattern PATTERN = new PatternBuilder() .groupBegin() .expression("R[EP]V") // type .groupBegin() .number("(dd)") // event .number("(dddd)"). Hex constants: 0x01, 0x02. startsWith: RUV, #, #IP, LANTRIX.

Differentiation

Not t800x@5094 / tek@5173 — taip is only on 5031 with: starts RUV/#/#IP · hex 0x01, 0x02 · pattern `private static final Pattern PATTERN = new Patter.

Catalogue stance

Stock Traccar reference only. Traxelio lists taip as positions_only.

Setup walkthrough

  1. 1

    Capture taip fingerprint

    Confirm frames match: TaipProtocolDecoder @ 5031: starts RUV/#/#IP · hex 0x01, 0x02 · pattern private static final Pattern PATTERN = new PatternBuilder() .groupBegin() .expression("R[EP]V") // type .groupBegin() .n

  2. 2

    Point taip at 5031

    Configure taip only to TCP 5031. Not t800x@5094 / tek@5173 — taip is only on 5031 with: starts RUV/#/#IP · hex 0x01, 0x02 · pattern `private static final Pattern PATTERN = new Patter.

  3. 3

    Bind taip identity

    Complete taip login/id on 5031 before expecting coordinates.

  4. 4

    Prove one taip fix

    Send one coordinate-bearing taip frame on 5031.

Setup

Public setup commands

Use these rows only after confirming the tracker password and SIM settings. Command families can differ between brands even when they use the same protocol.

Rinho

Guided setup available

gps.traxelio.com:5031 4 example models

Set server

>SIP0"gps.traxelio.com",5031<

Switch to TCP

>SCXIPTT<

APN commands depend on the carrier SIM in your tracker, so they are not shown here.

Reference

Configuration reference

Parameter Value
Port 5031

Telemetry fields

GPS Location Speed Altitude Heading / Direction Street Address GPS Accuracy Ignition Status Odometer / Mileage Battery Level

Common troubleshooting

taip on wrong port

Not t800x@5094 / tek@5173 — taip is only on 5031 with: starts RUV/#/#IP · hex 0x01, 0x02 · pattern `private static final Pattern PATTERN = new Patter.

taip connected, empty map

On 5031, taip may bind without coordinates — wait for a position frame matching: TaipProtocolDecoder @ 5031: starts RUV/#/#IP · hex 0x01, 0x02 · pattern private static final Pattern PATTERN = new PatternBuilder() .groupBegin() .expression("R[EP]V") // type .groupBegin() .n

T
Trax
Online
Say hello to Trax!