Telic on TCP 5067: four-digit head then 6 or 15-digit id, type, signed lon before lat; validity 1 will not plot.
On Traxelio
Hardware that speaks this protocol
Point this protocol at Traxelio
Confirm four ASCII digits then a 6 or 15-digit id then a type. Reject a % Telemax bind and TK102 brackets.
Configure only Telic to TCP 5067. Telic on 5067 is not Telemax on 5165 or TK102 on 5036.
Telic has no reply byte. A parsed CSV whose validity is not 1 is enough.
Send one dddd+id CSV with signed longitude before latitude and validity not 1 on 5067 and verify a map point.
Still offline after GPS lock
Telic on 5067 is not Telemax % bind on 5165 or TK102 brackets on 5036.
Validity 1 is void and will not plot. Send a CSV whose validity digit is not 1.
Telic sends longitude before latitude. A lat-first pair swaps the axes.
FAQ
No. Telic is digit-run CSV: four digits then a 6 or 15-digit unit id then a type. Concox families use 0x7878 binary login.
Any digit other than 1. Digit 1 is void and will not plot.
No. There is no reply byte. A parsed CSV whose validity is not 1 is the whole handshake.
Longitude first, then latitude, as signed integers. A long pair is divided by 1 000 000. A short pair is divided by 10 000.
SOS. Type 11 is ignition on. Type 12 is ignition off. Type 1 is power on. Those labels sit on the plotted point.