ThinkPower on TCP 5228: type 0x01 login, 0x03 heartbeat, 0x05 record, CRC16-CCITT, TLV lat/lon / 1e7.
On Traxelio
Hardware that speaks this protocol
Point this protocol at Traxelio
Confirm a type byte, index, two-byte length, and a CRC16 tail, not HR 0x80/0x90 and not a UDP 0x2E ping.
Configure only ThinkPower to TCP 5228. ThinkPower on 5228 is not ThinkRace on 5098, Radshid on 5265, or Positrex on 5252.
Finish a 0x01 login that carries the ASCII unit id on 5228 before expecting map points. Expect type 0x02 with byte 0.
Send one 0x05 record with value type 0x01 latitude and longitude on 5228 and verify a map point.
Still offline after GPS lock
ThinkPower on 5228 is not ThinkRace on 5098, Radshid on 5265, or Positrex on 5252.
A 0x01 login or 0x03 heartbeat will not plot. Wait for a 0x05 record with value type 0x01 lat/lon.
Types 0x02, 0x04, and 0x06 only ACK the socket. Check the map.
FAQ
No. ThinkPower opens with type 0x01 login, 0x03 heartbeat, or 0x05 record, each closed by CRC16-CCITT. Concox families use 0x7878 binary login.
Type 0x01 carries protocol major and minor, then a length-prefixed ASCII unit id. Reply type 0x02 writes 0 on success and 4 on failure.
Type 0x03 is answered with empty type 0x04. A map point needs a later 0x05 record with value type 0x01 latitude and longitude.
Value type 0x01 uses signed-magnitude integers divided by 10000000, speed as km/h divided by 10, and course divided by 100. This is not NMEA GPRMC text.
This dialect is positions only. SOS (0x10), remove (0x50), and tamper (0x51) ride as value types on the 0x05 record. There is no SMS family on this row.