TMG on TCP 5132: $ then three letters then IMEI; status above 0 plots; $rmv is power cut; no ACK.
On Traxelio
Hardware that speaks this protocol
Point this protocol at Traxelio
Confirm a line that opens $ then three lowercase letters then a comma then the IMEI. Reject $MGV and 0x7878.
Configure only TMG to TCP 5132. TMG on 5132 is not TLV on 5146 or Megastek on 5024.
TMG has no reply byte. A parsed $ line whose status is greater than 0 is enough.
Send one $rmv or $ion line whose status digit is greater than 0 on 5132 and verify a map point.
Still offline after GPS lock
TMG on 5132 is not TLV type 0E on 5146 or Megastek $MGV on 5024.
Status must be greater than 0. A 0 status binds the IMEI and will not plot.
This dialect has no reply byte. Check the map, not the socket for an ACK.
FAQ
No. TMG opens with $ then three lowercase letters then a comma then the IMEI. Concox families use 0x7878 binary login.
A status digit greater than 0. Status 0 is void and will not plot.
No. There is no reply byte. A parsed $ line is the whole handshake.
Power cut. $ebl is low power. $ibl is low battery. $tmp, $smt, and $btt are tamper. $ion is ignition on. $iof is ignition off.
This dialect is positions only. Two units are listed: TMG188 and TrackMiGaddi. There is no SMS family on this row.