Totem on TCP 5007: $$ then IMEI then $GPRMC or a $$0 typed line; A plots; ACK OK or $$0014AA.
On Traxelio
Hardware that speaks this protocol
Point this protocol at Traxelio
Confirm a line that opens $$ then a length then the IMEI, followed by $GPRMC, a pipe CSV, or a $$0 typed line.
Configure only Totem to TCP 5007. Totem on 5007 is not T55 on 5005, Hunter PRO on 5116, or Topin on 5199.
A $GPRMC or pipe line is answered with ACK OK. A $$0 typed line is answered with $$0014AA plus a trailing XOR.
Send one $GPRMC or pipe sentence whose status is A on 5007, or one $$0 typed line with lat/lon, and verify a map point.
Replace {password} with the tracker PIN or password.
Guided setup available
Enable GPRS
*{password},016,1#Use TCP mode
*{password},019,1#APN commands depend on the carrier SIM in your tracker, so they are not shown here.
Still offline after GPS lock
Totem on 5007 is not T55 on 5005, Hunter PRO on 5116, or Topin on 5199.
RMC or pipe status must be A. A V status binds the IMEI and will not plot. A year of 00 is dropped.
Only $GPRMC or pipe lines get ACK OK. A $$0 typed line is answered with $$0014AA plus a trailing XOR.
FAQ
No. Totem opens with $$ then the IMEI and either $GPRMC, a pipe CSV, or a $$0 typed line. Concox families use 0x7878 binary login.
A plots. V is void and will not plot.
A $GPRMC or pipe line is answered with ACK OK. A $$0 typed line is answered with $$0014AA plus a trailing XOR.
After $$ and the length digits, before the first pipe.
Odometer, fuel used, RPM, coolant, throttle, and a lat/lon pair. That line is treated as a fix.