13 devices 12 brands

Ulbotech Protocol (0xF8 binary and *TS text)

Ulbotech on TCP 5072: 0xF8 binary extras or *TS text closed by #, ACK 0xF8/0x01 or *TS01,ACK.

Positions go to this server

gps.traxelio.com:5072 TCP
I already have a tracker

Connect your tracker

Enter your tracker IMEI to see whether Traxelio recognizes the model before you start setup.

Hardware that speaks this protocol

Devices that speak Ulbotech

Point this protocol at Traxelio

Point Ulbotech at Traxelio

  1. 1

    Capture an Ulbotech fingerprint

    Confirm a 0xF8 binary frame or a *TS line closed by #. Reject License/@ACK and *XX20 captures as the wrong neighbor.

  2. 2

    Point Ulbotech at 5072

    Configure only Ulbotech to TCP 5072. Ulbotech on 5072 is not Tzone on 5029 or Upro on 5095.

  3. 3

    Wait for the Ulbotech ACK

    Binary gets 0xF8 0x01 0xFE plus CRC16-XMODEM. Text gets *TS01,ACK:XXXX#.

  4. 4

    Prove one Ulbotech fix

    Send one GPS extra 0x01 with HDOP below 9999 on 5072 and verify a map point.

gps.traxelio.com:5072 TCP

Replace {password} with the tracker PIN or password.

Ulbotech

Guided setup available

Set upload profile

{password},SUM;40S;30M;G;T#

APN commands depend on the carrier SIM in your tracker, so they are not shown here.

Still offline after GPS lock

Ulbotech still not landing

Ulbotech aimed at the wrong port

Ulbotech on 5072 is not Tzone on 5029 or Upro on 5095.

Session up, empty map

Need GPS extra 0x01 with HDOP below 9999. A *TS text line reuses the last location and will not plot a new point.

Got *TS01,ACK but no new point

Text ACK only proves the line parsed. Send a binary extra 0x01 for a new coordinate.

FAQ

Ulbotech leftover questions

Does Ulbotech send Concox 0x7878 frames?

No. Ulbotech sends a 0xF8 binary shell or a *TS line closed by #. Concox families use 0x7878 binary login.

What does an Ulbotech ACK look like?

Binary is answered 0xF8 0x01 0xFE plus CRC16-XMODEM. Text is answered *TS01,ACK:XXXX#.

Why does an Ulbotech frame bind without a map fix?

A new point needs GPS extra 0x01 with HDOP below 9999. A *TS line reuses the last location.

Where is the Ulbotech unit id?

Binary: eight BCD bytes after the header, skip the first nibble, 15 digits. Text: 15 digits after *TSdd,.

Can an Ulbotech unit run SMS setup or a controlled-action flow?

This dialect is positions only. T301, T303, and T360 class units are listed. There is no SMS family on this row.

T
Trax
Online
Say hello to Trax!