GV75 GPS tracker
Queclink

Queclink GV75 GPS Tracker · specs and details

Server address

gps.traxelio.com:5004
Queclink @Track Protocol (Traccar GL200 decoder, port 5004)

Send positions to this server

Check your GV75

Enter the tracker IMEI first so Traxelio can confirm setup options before activation.

The Queclink GV75 is a sealed IP67 2G motorcycle tracker on gl200 (TCP port 5004) · 1100 mAh backup pack, RS232, and ignition I/O set in Queclink Manage Tool or AT+GTBSI then AT+GTSRI SMS, then Traxelio shows live map, geofences, and confirmed immobilizer cut on GSM in Senegal and West Africa.

IMEI

Check First

Hardware

Review

Protocol known IMEI check first Works with Queclink @Track Protocol (Traccar GL200 decoder, port 5004) protocol

Quick answers

Which protocol and port does the GV75 use on Traxelio?

Queclink @Track decoded as gl200 on TCP port 5004. Point gps.traxelio.com and 5004 in Manage Tool. Do not pick gt06 (5023), h02 (5013), or Teltonika (5027).

Is GV75 the same as GV75W?

No. GV75 is 2G GSM, about 100 g, IP67. GV75W is the UMTS sibling (about 122 g, IP67, zero-power current). This page is the 2G GV75. Both still need gl200 TCP 5004 on Traxelio.

How do I provision GV75 without a four-digit SMS PIN?

Use Queclink Manage Tool over UART, or SMS AT+GTBSI (APN) then AT+GTSRI (server, report mode 3). Traxelio does not publish a default PIN. Factory password is often the model string.

Is Queclink Configurator the right desktop tool?

Searchers mean Queclink Manage Tool (sometimes listed as GL200 Manage Tool). It is not Teltonika Configurator. Traxelio's setup block lists copy-ready AT commands.

Overview

About the GV75

The Queclink GV75 is a sealed IP67 2G GNSS tracker for motorcycles, ATVs, and watercraft. It has internal antennas, a 1100 mAh backup pack, ignition and digital I/O, and RS232 on an 8-wire harness. It reports the Queclink @Track dialect that Traxelio decodes as gl200 on TCP port 5004. This page is the 2G GV75 (about 100 g), not the UMTS GV75W. Point Queclink Manage Tool or AT+GTBSI then AT+GTSRI at gps.traxelio.com:5004, then Traxelio plots live map, geofences, and confirmed immobilizer cut after dashboard confirmation.

About Queclink

Looking for the Queclink configurator? Queclink supplies the tool. Use it to point a GV, GL or GMT tracker that sends @Track at gps.traxelio.com, port 5004.

Speaks the Queclink @Track Protocol (Traccar GL200 decoder, port 5004) protocol. Read the protocol reference →

Protocol known

Traxelio recognizes this protocol, then checks the exact IMEI and model details before activation.

Technical Specs

Device Specifications

Traxelio compatibility

Brand Queclink
Protocol Queclink @Track Protocol (Traccar GL200 decoder, port 5004)
Status Protocol known
Setup Signals IMEI check first
Setup Check hardware →

Hardware specifications

Network 2G, GSM
GNSS GPS
Voltage range 8-32V
Battery 1100 mAh
IP rating IP67
Operating temperature -30 to +80 °C
Dimensions 102x46x20.5 mm
Weight 100 g
CAN bus none
MPN GV75

Accessories

12V/30A immobilizer relay (5-pin)

Open-drain DOUT wiring for engine cut

SKU: REL-5P-12V

Standard SIM with data + SMS

Provisioning and live reporting

SKU: SIM-DATA-SMS

Motorcycle harness / fuse tap

Constant 8–32 V plus ignition DIN

SKU: MOTO-HARNESS

Certified

Certifications

CE Anatel

Downloads

GV75 · Also sold as Queclink GV75 family by other brands

Setup

Check Setup Options for Your GV75

Setup guidance

Enter the tracker IMEI so Traxelio can review this exact hardware before setup.

Check hardware

Download or log in to Queclink Manage Tool

Windows UART tool for APN and server · also searched as GL200 Manage Tool or Queclink Configurator. Not Teltonika Configurator.

Queclink GV500CG

Alternative model

Queclink GV500CG

This is not the same device, but it can be a practical alternative from the same brand.

F CFA 30,000

Common issues

Unit was bought as GV75W / 3G

Check the label. GV75W is UMTS and a different SKU. This page is 2G GV75. Ingest is still gl200 TCP 5004 once the APN and server are set.

TCP never comes up after SMS

Send AT+GTBSI with the SIM APN first, then AT+GTSRI with report mode 3 (TCP long-connection), host gps.traxelio.com, port 5004. Mode 4 is UDP. Commands must end with $.

Buyer used Teltonika Configurator

GV75 does not speak Codec 8. Use Queclink Manage Tool or the AT+GTBSI / AT+GTSRI pair. Port 5027 will handshake nothing useful for this dialect.

Queclink

Other Queclink Devices

Alternatives

Comparable devices

FAQ

Frequently Asked Questions

Common questions about using the GV75 with Traxelio

Traxelio can receive position reports from the GV75 over the Queclink protocol, and setup details are confirmed from the IMEI.

Start with the IMEI check on this page. Traxelio will confirm whether this exact hardware can send position reports and what setup it needs before activation.

This page lists the GV75 as a tracker model with a known protocol. Traxelio shows self-service setup only when full protocol support is available.

Check your GV75 before setup

Enter the tracker IMEI so Traxelio can review this exact hardware before activation.