What is Pre-Trip Inspection?
In the United States, 49 CFR 392.7 says a commercial motor vehicle may not be driven unless the driver is satisfied that the safety parts it lists, covering brakes, steering, lights, tires, the horn, wipers, mirrors, couplings, wheels and emergency equipment, are in good working order. Section 396.13 adds that before driving, the driver must be satisfied the vehicle is in safe operating condition. When the last driver vehicle inspection report listed a defect, the driver must also review that report and sign it to acknowledge that the repair was certified. The rules do not set a walk-around script, so each fleet writes its own checklist. A usable one follows the vehicle from front to back: fluids and leaks, tires and lug nuts, lights, brake lines and air connections, coupling and fifth wheel, load securement, then a cab check of gauges, horn and seat belt. If a defect turns up, the driver reports it, and the carrier must repair any defect likely to affect safe operation before requiring or permitting the vehicle to be driven. Fleets that run the checklist in an app get a timestamp for each inspection, a place to photograph a defect, and a defect that reaches the maintenance team without a phone call.
How it works
- The driver reviews the last inspection report if it listed a defect, and the repair certified on it.
- The driver walks around the vehicle and checks brakes, steering, lights, tires, mirrors and coupling devices.
- Fluid levels, wipers, horn and emergency equipment are checked.
- Any defect is reported before the vehicle leaves.
- The carrier repairs defects that affect safety before the vehicle is driven.
Key facts
- Catches brake, tire and light problems before the road
- Gives every driver the same checklist
- Timestamped checks show the inspection happened
- Defects reach maintenance before the vehicle leaves