Google Maps lets you add up to 9 stops, final destination included, so a route holds 10 places with your starting point. It keeps your stops in the order you type them and never reorders them. That is Google's own rule, and it is why a 15-stop delivery round does not fit in one route. Below: what you can do inside the limit, how to chain routes past it, and when a route planner is worth it.

What the limit actually is

Google's help page for multiple destinations says you can add up to 9 stops, which includes the final destination. With your starting point, that makes 10 places per route.

Two details catch people out:

  • The order is yours. Google Maps does not work out the best sequence. To change it you drag a destination to a new position, so the route is only as good as the order you chose.
  • It works for driving, walking and cycling, not for transit or flights. Google states that directions to multiple destinations are not available for public transit or flight searches.

Inside the limit: get a better route from 10 places

If your round fits in 10 places, you can still lose time or fuel to a poor order. A quick method:

  1. Fix the first and last place. The depot at the start and the end point, usually the depot again or the last customer.
  2. Group stops by area. Stops in the same neighbourhood go next to each other, so you do not cross town twice.
  3. Respect time windows first. A customer who is only open until noon goes early, whatever the geography says.
  4. Drag the rest into a loop. Visit the far side of town in one sweep, then come back, instead of zigzagging.
  5. Compare two orders. Reorder, look at the total distance and time Google shows, and keep the shorter one.

This is a manual version of what optimizers do. It works for a handful of stops. It stops being practical at around 8 to 10, because the number of possible orders grows very fast.

Past the limit: chain several routes

When you have more than 10 places, split the round into legs and chain them. Each new route starts where the previous one ended.

  • Route 1: your start, then 9 stops. The last one is where route 2 starts.
  • Route 2: that stop, then 9 more stops.
  • Route 3: and so on.

Each leg adds 9 new stops, so 23 stops need 3 routes (9, then 9, then 5). Two tips:

  • Split by area, not by list position. Cut the round into geographic zones first, so the last stop of a leg is close to the first stop of the next.
  • Keep the legs in one document. Save each route link in a note or spreadsheet, in order. A driver should open leg 2 when leg 1 is done, not rebuild it.

Chaining works, but it has a cost: every leg is ordered by hand, and nothing checks that the whole round is sensible. A bad split can add real kilometres.

A worked example: 23 stops, one driver

Say a driver has 23 customers across a city, starting and ending at the depot.

  1. Cut the city into three zones: north, centre and south. Put 9, 9 and 5 customers in them.
  2. Route 1 starts at the depot and visits the 9 northern customers. Its last stop is the northern customer closest to the centre.
  3. Route 2 starts at that customer, visits the 9 central customers and ends at the central one closest to the south.
  4. Route 3 starts there, visits the 5 southern customers and finishes at the depot, which counts as its final destination.

Each route stays within 10 places, and no leg crosses the city twice. The one thing to watch is time windows: a customer who closes at noon belongs in the first route even if they sit in the centre, so adjust the zones before you build the legs.

When a route planner is worth it

A route planner takes a full list of addresses, finds a short order for you, and usually hands the result to a navigation app. The free tiers we checked in autumn 2026 ranged from about 10 to about 100 stops per route, and the limits change often, so check each vendor's own page before you rely on one. If you want to try one first, our free multi-stop route planner orders a list of stops for you.

A planner starts to pay off when:

Situation Why a planner helps
More than about 10 stops a day Manual ordering gets slow and the order gets worse
The same round every week You save the list and reuse it
Several drivers Stops are shared out so routes do not overlap
Time windows or a capacity limit Hand sorting cannot balance them

What a planner does not tell you is what the day actually looked like: whether the driver followed the route, how long each stop took, how long the engine idled. That part comes from the vehicle, not from the plan.

Plan it, then measure it

A plan is a promise. To know whether you kept it, compare it with the trip the vehicle really drove. This is where route optimization in Traxelio sits: plan multi-stop routes, then check them against real trip history from the vehicle. For delivery teams, the delivery use case shows how that looks day to day, and the glossary entry on route optimization explains the idea in plain terms.

Two free tools help while you plan:

  • The fuel cost calculator turns a route's distance into a fuel cost, for one trip or for a weekly round across several vehicles.
  • If you drive your own vehicle for work, the mileage calculator prices the same trips at the official mileage rate.

Key takeaways

  • Google Maps allows 9 stops including the destination, so 10 places per route, in the order you enter them.
  • Reorder by dragging, and fix the first and last place, group by area and respect time windows before you drag the rest.
  • Past 10 places, chain routes: each leg adds 9 new stops, so 23 stops take 3 routes.
  • From about 10 stops a day, or with several drivers, a route planner saves more time than manual ordering.
  • A plan only matters if you check it against what the vehicle really did.

See route optimization · Delivery fleets · Fuel cost calculator · See plans