Listed on NDTP V6, setup confirmed with Traxelio support
Check First
Review
A public device list shows the Santel Granit-Navigator on NDTP V6, port 5243. That is a list entry, not a datasheet, so check your unit's label and the seller's setup sheet.
Traxelio support confirms setup model by model. Send your model label and the IMEI, and wait for the confirmation before you buy a SIM or change settings on the unit.
Not according to the public device list, which places the Navigator 4 and 5 on a different protocol and port from the Santel Granit-Navigator. Check the label on your unit, and open the Granit hub for the other two models.
Overview
The Santel Granit-Navigator is a vehicle tracker that a public device list places on NDTP V6, port 5243. Traxelio support confirms setup model by model, so send your model label and IMEI before you buy a SIM or change any setting on the unit. No datasheet or setup sheet was found for this model, so use the seller's sheet for the settings screen. If your unit is a Granit Navigator 4 or 5, open the Granit hub, since the list gives those two a different protocol.
About Granit
Granit Navigator 4 and 5 trackers can report to Traxelio on port 5113. The Santel Granit-Navigator is listed on another protocol, so confirm yours with Traxelio support first.
Speaks the Ndtp V6 Protocol (0x7E 0x7E navdata) protocol. Read the protocol reference →
Protocol known
Traxelio recognizes this protocol, then checks the exact IMEI and model details before activation.
Technical Specs
| Brand | Granit |
| Protocol | Ndtp V6 Protocol (0x7E 0x7E navdata) |
| Status | Protocol known |
| Setup Signals | IMEI check first |
| Setup | Check hardware → |
Setup
Setup guidance
Enter the tracker IMEI so Traxelio can review this exact hardware before setup.
Granit
FAQ
Common questions about using the Granit-Navigator with Traxelio
Enter the tracker IMEI so Traxelio can review this exact hardware before activation.
Availability
Connect a tracker you already own, or add a vehicle.