AT4 GPS tracker
Jimi IoT

Jimi IoT AT4 GPS Tracker · specs, setup, and live tracking

Server address

gps.traxelio.com:5023
GT06 Protocol (Concox / Jimi family)

Send positions to this server

Check your AT4

Traxelio support can help you connect this model. Enter the tracker IMEI, then confirm setup with support help on the next screen.

10

Data Points

16+

Alerts

5

Vehicle Types

Setup with support help 2,347+ compatible devices Works with GT06 Protocol (Concox / Jimi family) protocol

Overview

About the AT4

Jimi IoT AT4 is a portable asset GNSS tracker for fleets that already have this hardware installed.

About Jimi IoT

Shenzhen-based manufacturer (now under Jimi IoT) of one of the broadest tracker catalogs in the industry · GT06N is the most-copied OBD/vehicle tracker design globally.

Speaks the GT06 Protocol (Concox / Jimi family) protocol. Read the protocol reference →

Works with Traxelio · no guided setup for this model

Guided setup is not available for this model. Contact Traxelio support with your IMEI and they can help you connect it.

Technical Specs

Device Specifications

Traxelio compatibility

Brand Jimi IoT
Protocol GT06 Protocol (Concox / Jimi family)
Status Compatible
Data Points 10
Supported Alerts 16+
Compatible Vehicles
Car Motorcycle Pick up Truck Bus
Setup Continue with support help →

Data Collected

What Your AT4 Reports to Traxelio

Your tracker sends 10 data points with every position update, giving you complete visibility.

Core Tracking

GPS Location

Live latitude and longitude coordinates updated every few seconds.

Speed

Current vehicle speed in km/h, used for speed alerts and driving analysis.

Altitude

Elevation above sea level, useful for terrain and route analysis.

Heading / Direction

Direction of travel in degrees, shown as compass bearing on the map.

Street Address

Reverse-geocoded street address for every position update.

GPS Accuracy

GPS signal precision in meters, indicating location reliability.

Engine & Driving

Ignition Status

Engine on/off status detected via the vehicle wiring harness.

Odometer / Mileage

Cumulative distance traveled, used for mileage reports and maintenance.

Engine Hours

Total engine running time, key for service interval tracking.

Sensors

Battery Level

Device or vehicle battery voltage to detect low-power conditions.

Data availability depends on device configuration and installation type.

Detectable Events

Alerts & Notifications

Receive 16+ live alerts from your AT4 via push notification, email, or WhatsApp.

Device online

The device is back online and transmitting data.

Device offline

The device has stopped reporting. It may have lost connection or power.

Device Moving

The vehicle is currently in motion.

Device Stopped

The vehicle is stationary.

Device overspeed

The vehicle is exceeding the set speed limit.

Geofence enter

The vehicle has entered a defined zone.

Geofence exit

The vehicle has exited a defined zone.

Tow

Possible towing activity detected, check vehicle status.

Ignition On

The ignition is ON. The engine has started.

Ignition Off

The ignition is OFF. The engine has been stopped.

Long Idle

The vehicle has been idling for a long period.

Hard Braking

Hard braking detected, driver safety alert.

Hard Acceleration

Rapid acceleration detected, driving behavior alert.

Hard Turning

Sharp turning detected, driving behavior alert.

Impact Detected

Potential impact detected based on sudden deceleration and course change pattern.

Key Benefits

Why Track Your AT4 with Traxelio

Know where my vehicles are

See all your vehicles on a live map

Keep records of all trips

Accurate mileage and trip history for billing and disputes

Prevent vehicle theft

Controlled immobilizer support for compatible installations

Get alerts when vehicles leave areas

Know instantly when vehicles cross designated zones

Monitor driver behavior

Track speeding, harsh braking, and risky driving

Control after-hours usage

Get alerts when vehicles move outside working hours

Reduce fuel costs

Identify fuel waste from idling and inefficient routes

Track maintenance schedules

Get reminders before breakdowns happen

Optimize delivery routes

Plan optimal routes and increase deliveries per day

Manage team access

Control who can see and manage which vehicles

Ready to put your AT4 on Traxelio?

Enter the tracker IMEI first, then verify your email and continue setup.

Connect your tracker

Setup

Check Setup Options for Your AT4

Setup guidance

Connection supported

gps.traxelio.com:5023

Traxelio can receive data from this protocol at the server above, but SMS setup depends on carrier SIM or model settings.

APN commands depend on the carrier SIM in your tracker, so they are not shown here.

View protocol setup guide

Setup guidance

Traxelio support can help you connect this model. Enter the tracker IMEI, then confirm setup with support help on the next screen.

Continue with support help
See the GT06 setup guide →

Download or log in to Carmatrix / iTrackOnline

Concox/Jimi IoT ships consumer-grade trackers (BLE, personal) with their own mobile apps (Carmatrix on iOS/Android). Fleet-grade GT06/JM-VL/WeTrack devices report to a platform · Concox provides iTrackOnline as the default, but the open gt06 protocol means Traxelio reads the same packets without any vendor lock-in.

App Store Google Play Web login

Jimi IoT

Other Jimi IoT Devices

Jimi IoT

Concox GT800

Verified

GT06
Jimi IoT

JM-VL02

Verified

GT06
Jimi IoT

AM01

GT06
Jimi IoT

BL10

GT06
View All Jimi IoT Devices

FAQ

Frequently Asked Questions

Common questions about using the AT4 with Traxelio

Yes, the AT4 is fully compatible with Traxelio. Connect your device and start tracking in minutes with live GPS location, geo-fencing, alerts, and trip history.

Create your Traxelio account, provide your AT4 tracker IMEI, and Traxelio guides the remaining setup.

The AT4 works with all core Traxelio features: live tracking, trip history, geo-zone alerts, speed alerts, and more. Premium features like driving behavior analysis and activity reports are also available.

Traxelio plans start at 17 USD per vehicle per month with the Basic plan. Premium and Platinum plans offer additional features like driving behavior analysis, documents storage, and advanced reporting.

Yes, Traxelio supports unlimited devices. You can monitor your entire fleet of Jimi IoT trackers from a single dashboard with live updates.

The AT4 reports 10 data points to Traxelio, including: GPS Location, Speed, Altitude, Heading / Direction, Street Address, GPS Accuracy, Ignition Status, Odometer / Mileage, Engine Hours, Battery Level. Data availability depends on device configuration and installation type.

With the AT4 connected to Traxelio, you can receive 16+ alert types, including: Device online, Device offline, Device Moving, Device Stopped, Device overspeed, Geofence enter, Geofence exit, Alarm, and more. Alerts are delivered via push notification, email, or WhatsApp.

Traxelio offers features beyond manufacturer apps: driving behavior analysis, multi-device dashboards, WhatsApp alerts, and works across brands. If you have trackers from multiple manufacturers, Traxelio lets you manage them all in one place.

Check your AT4 before setup

Traxelio support can help you connect this model. Continue, then confirm setup with support help.

Availability

Traxelio does not stock this model.

Connect a tracker you already own, or add a vehicle.

Connect your tracker Add vehicle to your fleet