Compact wired motorcycle tracker · cut-off relay, shock alarm, GT06 protocol. The default motorcycle/e-bike tracker in Dakar's informal market.
Data Points
Alerts
Vehicle Types
Yes · compact form factor, 9-90V wide voltage range covers motorcycle (12V), scooter (24V), and most small EVs. Works in cars too but GT06N is the more common car choice.
GT800's output line drives a low-current relay coil (max ~200mA). Use a 5-pin automotive relay (12V/30A) between the output and the motorcycle fuel pump or ignition kill circuit.
GT800 is splash-resistant, not fully waterproof. Mount under the seat or fuel tank, never in the front fairing where rain reaches it. For wet exposure, use heat-shrink + dielectric grease on all wire joints.
Overview
Concox GT800 is a compact wired GPS tracker designed for motorcycles, e-bikes, and small vehicles. Cut-off relay, shock alarm, GT06 protocol.
About Jimi IoT
Shenzhen-based manufacturer (now under Jimi IoT) of one of the broadest tracker catalogs in the industry · GT06N is the most-copied OBD/vehicle tracker design globally.
Speaks the GT06 Protocol (Concox / Jimi family) protocol. Read the protocol reference →
Works with Traxelio · connect it yourself
Verify your email, then add the tracker details on the next screen.
Concox/Jimi IoT ships consumer-grade trackers (BLE, personal) with their own mobile apps (Carmatrix on iOS/Android). Fleet-grade GT06/JM-VL/WeTrack devices report to a platform · Concox provides iTrackOnline as the default, but the open gt06 protocol means Traxelio reads the same packets without any vendor lock-in.
Technical Specs
| Brand | Jimi IoT |
| Protocol | GT06 (Concox / Jimi family) |
| Status | Verified |
| Data Points | 10 |
| Supported Alerts | 16+ |
| Compatible Vehicles |
Car
Motorcycle
Pick up
Truck
Bus
|
| Setup | Start setup → |
Certified
Data Collected
Your tracker sends 10 data points with every position update, giving you complete visibility.
Live latitude and longitude coordinates updated every few seconds.
Current vehicle speed in km/h, used for speed alerts and driving analysis.
Elevation above sea level, useful for terrain and route analysis.
Direction of travel in degrees, shown as compass bearing on the map.
Reverse-geocoded street address for every position update.
GPS signal precision in meters, indicating location reliability.
Engine on/off status detected via the vehicle wiring harness.
Cumulative distance traveled, used for mileage reports and maintenance.
Total engine running time, key for service interval tracking.
Device or vehicle battery voltage to detect low-power conditions.
Data availability depends on device configuration and installation type.
Detectable Events
Receive 16+ live alerts from your Concox GT800 via push notification, email, or WhatsApp.
The device is back online and transmitting data.
The device has stopped reporting. It may have lost connection or power.
The vehicle is currently in motion.
The vehicle is stationary.
The vehicle is exceeding the set speed limit.
The vehicle has entered a defined zone.
The vehicle has exited a defined zone.
Possible towing activity detected, check vehicle status.
The ignition is ON. The engine has started.
The ignition is OFF. The engine has been stopped.
The vehicle has been idling for a long period.
Hard braking detected, driver safety alert.
Rapid acceleration detected, driving behavior alert.
Sharp turning detected, driving behavior alert.
Potential impact detected based on sudden deceleration and course change pattern.
Key Benefits
See all your vehicles on a live map
Accurate mileage and trip history for billing and disputes
Controlled immobilizer support for compatible installations
Know instantly when vehicles cross designated zones
Track speeding, harsh braking, and risky driving
Get alerts when vehicles move outside working hours
Identify fuel waste from idling and inefficient routes
Get reminders before breakdowns happen
Plan optimal routes and increase deliveries per day
Control who can see and manage which vehicles
Enter the tracker IMEI first, then verify your email and continue setup.
Setup
Setup guidance
gps.traxelio.com:5023
Public setup commands are available on the protocol guide for this command family.
APN commands depend on the carrier SIM in your tracker, so they are not shown here.
View protocol setup guideSetup guidance
Enter the tracker IMEI first, then verify your email and continue setup.
Pricing
This device retails for $25.00 – $45.00
Traxelio plan from 17 USD/mo · See all plans →
Alternative model
This is not the same device, but it can be a practical alternative from the same brand.
F CFA 35,000
Default sensitivity is high. Lower it via SMS command or in Traxelio's device-config screen. Set the threshold to fire only on impacts > 0.5G.
GT800 draws ~5mA in sleep mode · negligible on a healthy 12V battery, but adds up if the bike sits 2+ weeks. Add a battery cut-off or use Traxelio's 'park mode' that reduces wake intervals.
Jimi IoT
Alternatives
FAQ
Common questions about using the Concox GT800 with Traxelio
Start setup yourself, with help available when you need it.