Cellocator on TCP and UDP 5033: MCGP, type 0 status or type 11 modular, type-4 ack, sum checksum.
On Traxelio
Hardware that speaks this protocol
Point this protocol at Traxelio
Confirm a frame that opens MCGP, not Carscop caret ASCII and not Castel @@.
Configure only Cellocator to TCP or UDP 5033. Cellocator on 5033 is not Carscop on 5040 or Castel on 5086.
Most bodies are answered type 4. Type 11 is answered with a modular-ext ack whose inner module type is 9.
Send one type-0 status with lat/lon, or a type-11 body with GPS module 6, and verify a map point.
Still offline after GPS lock
Cellocator on 5033 is not Carscop on 5040 or Castel on 5086.
Type 0 plots. Type 11 plots when GPS module 6 is present. Types 3, 7, 8, and 9 will not plot.
Expect type 4. Type 11 expects a modular-ext ack. Check the map, not a Concox 0x7878 reply.
FAQ
No. Cellocator opens with MCGP then a type byte and a little-endian unique id. Concox families use 0x7878 binary login.
Type 0 plots. Type 11 plots from modular GPS records. Types 3, 7, 8, and 9 are acknowledged and do not plot.
Yes. Type 4 acknowledges most bodies. Type 11 is answered with a modular-ext ack whose inner module type is 9.
Default MCGP bodies convert radians. When the fourth header byte is not P, lat and lon are signed integers divided by 10 million.
This dialect is positions only. Four catalogue devices are listed (CelloTrack 6M IP65, CelloTrack IP67, CelloTrack XT, Ekas Tracker). There is no SMS family on this row.