GoPass AVL
Guided setup available
Set reporting interval
115#{password}#60
APN commands depend on the carrier SIM in your tracker, so they are not shown here.
T55 on 5005: multi $GPRMC/$GPGGA/$TRCCR/QZE family; A plots; optional OK1 reply.
On Traxelio
Hardware that speaks this protocol
Point this protocol at Traxelio
Confirm a $GPRMC / $TRCCR / QZE, line, not a Hunter PRO >id< wrap and not *T57#.
Configure only T55 to 5005. T55 on 5005 is not Hunter PRO on 5116 or T57 on 5155.
OK1 is sent only when ACK is enabled on that unit. A parsed A-status RMC is enough.
Send one $GPRMC whose status is A on 5005 and verify a map point.
Replace {password} with the tracker PIN or password.
Guided setup available
Set reporting interval
115#{password}#60
APN commands depend on the carrier SIM in your tracker, so they are not shown here.
Still offline after GPS lock
T55 on 5005 is not Hunter PRO on 5116 or T57 *T57# on 5155.
RMC status must be A. A V status will not plot. $GPIOP alone reuses the last point.
$GPIOP stores power and battery on the last point. Send one A-status RMC or GGA for a map fix.
FAQ
No. T55 is a multi $GPRMC / $GPGGA / QZE family. Concox families use 0x7878 binary login.
A plots. V is void and will not plot.
Only when ACK is enabled on the unit. The reply is OK1. Most rows do not wait for one.
A unit id may sit before the $ mark. $PGID, $DEVID, IMEI, and $CONNECT also bind.
No. $GPIOP reuses the last point and stores power and battery only.