TRV on TCP 5010: 2-3 letter prefix then APxx/CPxx closed by #; A plots; AP01 is answered BP01#.
On Traxelio
Hardware that speaks this protocol
Point this protocol at Traxelio
Confirm an ASCII line that opens with TRV or a two-letter prefix, then APxx, and closes #. This is not Tzone 0x2424 and not a Watch bracket wrap.
Configure only TRV to TCP 5010. TRV on 5010 is not Tzone on 5029 or Watch on 5093.
AP01 is answered BP01#. That reply is not a map point. Some heartbeat types have no reply.
Send one AP01, AP10, YP03, or YP14 line whose letter is A on 5010 and verify a map point.
Guided setup available
Set upload interval to 60 seconds
TIMER,60#Read back upload interval
param#APN commands depend on the carrier SIM in your tracker, so they are not shown here.
Still offline after GPS lock
TRV on 5010 is not Tzone 0x2424 on 5029 or Watch on 5093.
Letter A on AP01/AP10/YP03/YP14 plots. AP00 only binds the IMEI. V will not plot.
Some heartbeat types are not answered. Check the map for an A-letter AP01 line, not the socket for every hash.
FAQ
No. TRV is ASCII APxx closed by a hash. Concox families use 0x7878 binary login.
A plots on AP01, AP10, YP03, and YP14. V will not plot.
The first letter of the type is stepped, then a hash: AP01 becomes BP01#. That reply is not a map point.
On an AP00 line, after the type and before the first comma. Later APxx lines reuse that session.
AP01, AP10, YP03, and YP14 with letter A. AP00 only binds. CP01, AP02, and AP03 reuse the last point.