Explore more
Which AM3 model you have, and how it reports to Traxelio
Alematics AM3 is a 3G vehicle tracker series with two ordering codes, AM3-S and AM3-W. A public device list shows it on the alematics protocol, which Traxelio receives on port 5140.
A public device list shows the AM3-S, AM3-W, AM3-S(V) and AM3-W(V) on the alematics protocol. Traxelio receives that protocol on port 5140, with gps.traxelio.com as the server. Ask Traxelio support to confirm the port for your unit before you switch.
Alematics lists AM3-S and AM3-W as the two ordering codes of the AM3 series. The AM3-S(V) appears in a public device list but not on the Alematics product page, so check your seller's datasheet for what the V variant adds. Traxelio has pages for the AM3-S, AM3-S(V) and AM3-W.
Alematics describes the AM3 as a full featured 3G vehicle tracking solution with WCDMA, HSPA, EDGE and GPRS coverage. 3G networks are being switched off in some markets, so check with your carrier that a network the unit can use is still active where you operate it.
Alematics does not publish setup commands on its product page, so this page offers no commands. Use the setup sheet from your seller to set the server to gps.traxelio.com and the port to 5140, then contact Traxelio support if the first position does not arrive.
The AM3 series lists two positive and two negative trigger inputs, three digital outputs, up to two RS-232 ports, a 1-Wire interface and one 0 to 30 VDC analog input. Which of these show up in Traxelio depends on what the alematics protocol reports, so test each input you rely on with one vehicle first.
Brand profile
A 3G vehicle tracker series with trigger inputs, digital outputs, RS-232 ports and a 1-Wire interface
Alematics protocol received on port 5140; 8V to 32V DC tracker with RS-232 and 1-Wire interfaces
Compatibility & setup
Switch platforms
Keep your AM3 hardware: the alematics protocol is received on port 5140.
Run every vehicle from one Traxelio account with geofences, alerts and trip history.
Move one test vehicle first, confirm its position, then switch the rest.
Explore more
Keep your devices, move reporting to Traxelio, and start in minutes.
Connect
