OBD-II passthrough or extension cable
Keep the vehicle diagnostic port free
SKU: OBD-EXT
Server address
Send positions to this server
The ATrack AX11 is an OBD-plug 4G Cat.1/Cat.M1 tracker on atrack (TCP port 5044) · official sheet 84×52×25 mm, 80 g, 90 mAh, SAE J1962 with J1939 and J1708. Point AT$GPRS at gps.traxelio.com port 5044 or set Configurator Main Server there. Traxelio plots live map and OBD data. Not AX9 63×54×28 mm.
Data Path
Check First
Review
ATrack binary or ASCII on TCP port 5044. AT$GPRS=1,"
No. AX11 is the 4G OBD 84×52×25 mm housing. AX9 is a separate 2G/3G OBD 63×54×28 mm page. Keep both slugs.
AT$PASS exists on the ATrack command set. Traxelio does not publish a default PIN on this page. Configurator USB is the first-config path.
Plug SAE J1962 Type B into the vehicle OBD socket. Optional Deutsch 6/9-pin adapters for trucks. It is not a three-wire harness.
Overview
The ATrack AX11 is an OBD-plug 4G Cat.1/Cat.M1 vehicle tracker on Traxelio's atrack catalogue. ATrack's official sheet lists 84×52×25 mm, 80 g, a 90 mAh backup pack, SAE J1962 Type B, and OBD-II plus J1939 and J1708. Traxelio listens on TCP 5044, not GPSWOX 6044 or Traccar 5026. Doubled GSC atrack-atrack-ax11 URLs 301 here. Point AT$GPRS at gps.traxelio.com port 5044, or set ATrack Configurator Main Server to that host, then Traxelio plots live map, geofences, and OBD data.
About ATrack
ATrack is a Taiwan GPS brand on Traxelio's atrack protocol (TCP port 5044) · separate setup pages for OBD AX5/AX9/AX11, hardwired AL1/AK7S, magnetic AS11, and compact AY5. Point AT$GPRS or Configurator Main Server at gps.traxelio.com port 5044. GPSWOX 6044 is not Traxelio.
Speaks the ATrack Protocol (AX5 / AX7 / AX9 / AT5B / AK7V family) protocol. Read the protocol reference →
Protocol known · setup review required
Traxelio recognizes this protocol, then checks the exact IMEI and model details before activation.
Technical Specs
| Brand | ATrack |
| Protocol | AtTrack (proprietary) |
| Status | Protocol known |
| Data Path | Under review |
| Setup Signals | IMEI check first |
| Hardware Scope | Review before activation |
| Setup | Check hardware → |
| Network | 4G, LTE Cat.1, LTE Cat.M1 |
| GNSS | GPS, GLONASS |
| Voltage range | 12-24V |
| Battery | 90 mAh |
| Operating temperature | -20 to +60 °C |
| Dimensions | 84x52x25 mm |
| Weight | 80 g |
| CAN bus | OBD-II / J1939 / J1708 |
| MPN | AX11 |
Keep the vehicle diagnostic port free
SKU: OBD-EXT
Provisioning and live reporting
SKU: SIM-DATA-SMS
Certified
Setup
Setup guidance
Traxelio reviews this model's protocol and IMEI before showing public setup steps.
Setup guidance
Enter the tracker IMEI so Traxelio can review this exact hardware before setup.
Windows Configurator over USB-to-serial, ATrack Device Management (ADM), or SMS AT$GPRS. Traxelio port is 5044.
Traxelio decodes atrack on TCP 5044. Keep host gps.traxelio.com and port 5044.
AX11 is 84×52×25 mm and 80 g on ATrack's sheet. AX9 keeps its own OBD page.
Fill the carrier APN in AT$GPRS. Confirm port 5044 and TCP. GPRS is off until that command enables it.
ATrack
Alternatives
FAQ
Common questions about using the ATrack AX11 with Traxelio
Enter the tracker IMEI so Traxelio can review this exact hardware before activation.
Availability
Connect a tracker you already own, or add a vehicle.