13 devices 1 brand

Fifotrack Protocol

Fifotrack ##length,imei,* text framing on Traccar TCP 5124 with photo/media buffer and rich alarm codes.

Positions go to this server

gps.traxelio.com:5124 TCP
I already have a tracker

Connect your tracker

Enter your tracker IMEI to see whether Traxelio recognizes the model before you start setup.

Point this protocol at Traxelio

Point Fifotrack at Traxelio

  1. 1

    Confirm Fifotrack ## grammar

    Sample should start with ## and carry IMEI early — not Gotop DATE: labels.

  2. 2

    Server TCP 5124

    Set host + 5124; reboot.

  3. 3

    Wait for location type sentence

    Confirm lat/lon and status bits before alarm tuning.

  4. 4

    Optional photo test

    Only after positions decode; treat media as SKU-specific.

  5. 5

    Alarm spot-check

    Force SOS or power-cut if supported; match alarm vocabulary.

gps.traxelio.com:5124 TCP

Replace {password} with the tracker PIN or password.

What Traxelio surfaces from these packets

Fifotrack fields Traxelio reads

  • GPS Location
  • Speed
  • Altitude
  • Heading / Direction
  • Street Address
  • GPS Accuracy
  • Ignition Status
  • Odometer / Mileage
  • Engine Hours
  • Battery Level
  • Fuel Level
  • Network / Cell Info

Still offline after GPS lock

Fifotrack still not landing

Aimed at Gotop 5050

Retarget to 5124; ##len,imei will not parse as Gotop DATE: sentences.

Length field mismatch

Corrupt ##len drops frames; compare declared length to payload.

Photo stuck

Media buffer needs complete parts; enable camera in vendor tool.

FAQ

Fifotrack leftover questions

Same as TK103?

No. TK103 is a separate family on 5002 with its own frame decoder.

Blanket Traxelio claim?

No — positions_only keyed to Traccar Fifotrack.

Binary?

Wire is framed text (##…), not Bitrek/BCE binary tags.

T
Trax
Online
Say hello to Trax!