T55 ASCII on Traccar TCP 5005: multi-family NMEA-ish decoder ($GPRMC/$GPGGA/$GPGLL/$GPRMA/$TRCCR/$GPIOP/QZE/$PUBX/$GPTXT/$ID…).
TCP 5005.
$GPRMC / $GPGGA / $TRCCR / QZE.
Not T57 *T57# on 5155.
T55 on Traccar TCP 5005 is a multi-pattern NMEA hub. T55ProtocolDecoder accepts $G[PLN]RMC, $G[PLN]GGA, $G[PLN]GLL, $GPRMA, $TRCCR, $GPIOP, QZE,, $PUBX, $GPTXT,NET, $ID,…GPSE, plus $PGID/$DEVID identity starts.
Do not confuse with T57 *T57# on 5155. T55’s identity is the multi-$ NMEA/QZE hub on 5005.
Stock Traccar reference only. Traxelio lists T55 as positions_only.
ASCII should show $GPRMC/$TRCCR/QZE — not *T57#.
Save APN server hostname/IP and port 5005; reboot.
Classic RMC A-fix proves the common path.
Power/battery sentences are siblings, not replacements for RMC.
Setup
Use these rows only after confirming the tracker password and SIM settings. Command families can differ between brands even when they use the same protocol.
GoPass AVL
Set server
999#{password}#gps.traxelio.com#5005Set reporting interval
115#{password}#60APN commands depend on the carrier SIM in your tracker, so they are not shown here.
Setup guidance
This model is normally configured in its original platform before moving.
Reference
| Parameter | Value |
|---|---|
| Port |
5005
|
All Models
Start with the strongest matches, then use pagination or brand pages for the full compatibility list.
Compatible Brands
*T57# will not match T55 multi-$ patterns. Move to 5005.
I/O/power without RMC/GGA yields no coordinates.