LV-CAN200 adapter
Factory CAN on INPUT 5/6
SKU: LV-CAN200
Server address
Send positions to this server
The Teltonika FM36M1 is a hardwired LTE Cat-M1 / NB-IoT tracker with GSM fallback on Codec 8 (port 5027) · 77×62×19 mm, 70.4 g, IP41, 170 mAh backup, CAN only via LV-CAN200 or ALLCAN300. Point gps.traxelio.com:5027 in Configurator. Traxelio plots live map and geofences.
Data Points
Alerts
Vehicle Types
Teltonika Codec 8 Extended AVL on TCP port 5027. Set gps.traxelio.com and 5027 in Configurator 2004/2005. Do not pick h02 or gt06.
No. The radio is LTE Cat-M1 and NB-IoT with GSM/GPRS fallback. Traxelio does not invent a 3G FM36 parent; /fm36 is not a published page.
Not by itself. INPUT 5 and INPUT 6 take an LV-CAN200 or ALLCAN300 adapter, same class as FMB130. For built-in dual CAN on 2G, compare FMB140.
Teltonika Configurator over USB. SMS uses two leading spaces then setparam for APN 2001 and server 2004/2005=5027. There is no four-digit SMS PIN on this model.
Overview
The Teltonika FM36M1 is a hardwired LTE Cat-M1 / NB-IoT GNSS tracker with GSM fallback. It reports Codec 8 AVL on port 5027. 4glte.eu lists 77×62×19 mm, 70.4 g, and IP41, with a 170 mAh backup pack and internal antennas. CAN is adapter-only on INPUT 5/6 (LV-CAN200 or ALLCAN300). It is not a 3G FM36, not a missing FM36 parent, and not the FMB630 serial truck box. Traxelio plots live map and geofences once Configurator points the unit at port 5027.
About Teltonika
Lithuanian fleet-grade GPS hardware (FMB, FMC, FMM families) shipped to 150+ countries, the de-facto European standard for commercial vehicles.
Speaks the Teltonika Codec 8 Protocol protocol. Read the protocol reference →
Works with Traxelio · connect it yourself
Verify your email, then add the tracker details on the next screen.
Technical Specs
| Brand | Teltonika |
| Protocol | Teltonika Codec 8 Protocol |
| Status | Compatible |
| Data Points | 12 |
| Supported Alerts | 17+ |
| Compatible Vehicles | |
| Setup | Start setup → |
| Network | LTE Cat-M1, NB-IoT, 2G, GSM |
| GNSS | GPS, GLONASS, Galileo, BeiDou, SBAS, QZSS |
| Voltage range | 10-30V |
| Battery | 170 mAh |
| IP rating | IP41 |
| Operating temperature | -40 to +85 °C |
| Dimensions | 77x62x19 mm |
| Weight | 70 g |
| CAN bus | Adapter-only (LV-CAN200 / ALLCAN300) |
| MPN | FM36M1 |
Factory CAN on INPUT 5/6
SKU: LV-CAN200
Open-collector DOUT wiring for engine cut
SKU: REL-5P-12V
Provisioning and live reporting
SKU: SIM-DATA-SMS
Certified
Data Collected
Your tracker sends 12 data points with every position update, giving you complete visibility.
Live latitude and longitude coordinates updated every few seconds.
Current vehicle speed in km/h, used for speed alerts and driving analysis.
Elevation above sea level, useful for terrain and route analysis.
Direction of travel in degrees, shown as compass bearing on the map.
Reverse-geocoded street address for every position update.
GPS signal precision in meters, indicating location reliability.
Engine on/off status detected via the vehicle wiring harness.
Cumulative distance traveled, used for mileage reports and maintenance.
Total engine running time, key for service interval tracking.
Device or vehicle battery voltage to detect low-power conditions.
Fuel tank level percentage, used for refill detection and consumption reports.
Cell tower and signal strength data for connectivity diagnostics.
Data availability depends on device configuration and installation type.
Detectable Events
Receive 17+ live alerts from your FM36M1 via push notification, email, or WhatsApp.
The device is back online and transmitting data.
The device has stopped reporting. It may have lost connection or power.
The vehicle is currently in motion.
The vehicle is stationary.
The vehicle is exceeding the set speed limit.
The vehicle has entered a defined zone.
The vehicle has exited a defined zone.
Possible towing activity detected, check vehicle status.
The ignition is ON. The engine has started.
The ignition is OFF. The engine has been stopped.
The vehicle has been idling for a long period.
Hard braking detected, driver safety alert.
Rapid acceleration detected, driving behavior alert.
Sharp turning detected, driving behavior alert.
Potential impact detected based on sudden deceleration and course change pattern.
A fuel refill was detected.
Key Benefits
See all your vehicles on a live map
Accurate mileage and trip history for billing and disputes
Immobilizer requests for compatible installations
Know instantly when vehicles cross designated zones
Track speeding, harsh braking, and risky driving
Get alerts when vehicles move outside working hours
Identify fuel waste from idling and inefficient routes
Get reminders before breakdowns happen
Plan optimal routes and increase deliveries per day
Control who can see and manage which vehicles
Enter the tracker IMEI first, then verify your email and continue setup.
Setup
Setup guidance
gps.traxelio.com:5027
Public setup commands are available on the protocol guide for this command family.
APN commands depend on the carrier SIM in your tracker, so they are not shown here.
View protocol setup guideSetup guidance
Enter the tracker IMEI first, then verify your email and continue setup.
Desktop Teltonika Configurator for APN and server setup · FOTA WEB for firmware on supported FM36 family builds.
FM36M1 is the 70.4 g Cat-M1 cabin unit. Serial tachograph and dual RS232 live on FMB630, not here.
Traxelio does not invent an FM36 parent. Canon is /fm36m1.
Blank Teltonika SMS login needs two leading spaces. If the phone strips them, configure over USB.
Teltonika
Teltonika
Teltonika
Teltonika
Teltonika
Alternatives
FAQ
Common questions about using the FM36M1 with Traxelio
Start setup yourself, with help available when you need it.
Availability
Connect a tracker you already own, or add a vehicle.